Handwheel Operated Industrial Globe Valve 2.5 Inch 150LB Trim 13Cr For Flow Control

A216 WCB Globe Valve 2.5 inch 150LB Trim 13Cr Industrial Valve For Flow Control

Quick Details:

1. Product: 2.5 inch 150LB Wcb Globe Valve

2. Model: J40H
3. Bolted Design: Bolted Bonnet (B.B)
4. Size: 2 1/2 inch
5. Pressure Ratings: ANSI 150LB / 150#
6. Flange End: RF, FF
7. Materials Available in: Carbon Steel A216 - WCB

8. Trim materials: Trim 1#, 13CR
9. Actuator: Manual, Handwheel Operated
10. NACE MR 0175

Features:

1. Generally
Bolted Bonnet: Outside Screw and Yoke: Rising stems: Metallic seating surfaces

2. Body and Bonnet Connection
Class150 globe valves are usually bolted bonnet.

3. Bonnet Gasket Style

Stainless steel + flexible graphite wounded gasket is used for Class150.

4. Packing Seal
As usual, flexible graphite is used for packing material. PTFE or combined packing material can be also used if being requested by the customer. The surface roughness between the packing and packing seat is Ra 3.2 μm, so the stem contact the packing surface tightly but rotate freely. The roughness of stem sealing face is Ra 0.8 μm after being precisely machined to ensure the reliable tightness.

5. Stem Design

The stem is of integral forged design. The minimum diameter of the stem shall per the standard requirement.

6. Backseat Design

All our globe valves have the backseat design. In most cases, the carbon steel globe valve is fitted with a renewable backseat. For stainless steel globe valve, the backseat is machined directly in the bonnet or is machined after welding. When the globe valve is at fully open position, the sealing of the backseat can be very reliable.

7. Seat

For carbon steel globe valve, the seat is usually forged steel. The sealing surface of the seat is spray welded with hard alloy specified by the customer. Renewable threaded seat is used for NPS≤10 globe valves, and welded on seat can be also optional if being requested by the customer. Welded on seat is used for NPS≥12 carbon steel globe valves. For Stainless steel globe valve, integral seat is usually adopted, or to weld hard alloy directly integrally. Threaded or welded on seat is also optional for stainless steel globe valve if being requested by the customer.

8. Stem Nut

Usually, the stem nut is made of ASTM A439 D2. it is also can be made of copper ally if being requested by the customer. For large sized globe valve, if the rolling bearing is fitted,it is effective to reduce the torque of globe valve for easy operation.

9. Operation

In most of cases, handwheel & gearbox is usually used for globe valve operatrion. Chain wheel and electric actuator can be also used for globe valve operation if being requested by the customers.

10. Other Globe Valves

Besides the common globe valves, we also makes cryogenic globe valve, Bellow sealed globe valve, Jacketed globe valve, etc.

Parts and Material List

Standards

Design and Manufacture: Cast steel globe valve to BS 1873 and ASME B16.34
Inspection and Test: API 598.

End flange dimension: ASME B16.5.

BW end dimension: ASME B16.25.

Face to face and end to end: ASME B16.10.

Pressure-temperature ratings: ASME B16.34.

Main Dimensions For Valve 150LB: