API Cast Steel Butt Weld Globe Valve Hardfaced HF Bolted Bonnet Bevel Gear Operated 900LB

Api Cast Steel Flanged Globe Valve Hardfaced HF Bolted Bonnet Bevel Gear Operated 900LB

Quick Details:

1. Type: Industrial Globe Valves
2. OS&Y Construction, Bolted Bonnet
3. Size Range of Globe Valve: 2" to 12"
4. Pressure Ratings: ANSI 900LB / 900#
5. End Connections: Flanged (RF, RTJ), Butt welding (BW)
6. Materials Available in: WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, C12, 4A, 5A or Equivalent;

7. Various trim materials are available to suit service conditions
8. Actuator: Manual, Bevel Gear
9. NACE MR 0175

Standards

Design and Manufacture: Cast steel globe valve to BS 1873 and ASME B16.34
Inspection and Test: API 598.

End flange dimension: ASME B16.5.

BW end dimension: ASME B16.25.

Face to face and end to end: ASME B16.10.

Pressure-temperature ratings: ASME B16.34.

Features:
1. General:

Bolted Bonnet: Outside Screw and Yoke

Rising stems

Metallic seating surfaces

2. Body and Bonnet Connection
Bolted Bonnet (B.B)

3. Bonnet Gasket Style

The metail ring gasket is used for Class900 globe valve

4. Packing Seal
As usual, flexible graphite is used for packing material. PTFE or combined packing material can be also used if being requested by the customer.

5. Stem Design

The stem is of integral forged design. The minimum diameter of the stem shall per the standard requirement.

6. Backseat Design

All our globe valves have the backseat design. In most cases, the carbon steel globe valve is fitted with a renewable backseat. For stainless steel globe valve, the backseat is machined directly in the bonnet or is machined after welding. When the globe valve is at fully open position, the sealing of the backseat can be very reliable.

7. Seat

For carbon steel globe valve, the seat is usually forged steel. The sealing surface of the seat is spray welded with hard alloy specified by the customer. For Stainless steel globe valve, integral seat is usually adopted, or to weld hard alloy directly integrally.

8. Stem Nut

Usually, the stem nut is made of ASTM A439 D2. it is also can be made of copper ally if being requested by the customer. For large sized globe valve, if the rolling bearing is fitted,it is effective to reduce the torque of globe valve for easy operation.

9. Operation

In most of cases, handwheel & gearbox is usually used for globe valve operatrion.

10. Other Globe Valves

Besides the common globe valves, we also makes cryogenic globe valve, Bellow sealed globe valve, Jacketed globe valve, etc.

Descriptions:

1. Industrial Globe Valve Parts and Material List:

2. Main Connection Dimensions for Class 900LB: